Gentle High Flow Watering Nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This nozzle fits a standard garden hose thread and quickly waters plants without damaging the leaves or flowers.
- Ocena
- 4,857 / 5
- Polubienia
- 77
- Pobrania
- 245
- Wydruki
- 7
- Wyświetlenia
- 1147
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Watering nozzle fits standard garden hose. Has very high flow rate for quick watering but gentle flow does not damage plants or flowers or disturb dirt. Spray holes are designed to spread water out. Can be put on a garden hose and also fits many watering wands as a replacement nozzle. Prints without supports and should work in most materials like PLA, PETG, ABS etc. I printed with PETG, 0.4 mm nozzle and 0.20 mm layer height. Be sure to use at least 5 perimeters and 100% rectilinear infill for strength. You will need to add a standard garden hose gasket. If you water system has very limited pressure and flow you should try my smaller version of this named “Watering Nozzle-small” which is available on Printables.