Nozzle for KZ IEM's
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle replacement for KZ IEM's in case you've lost the original ones.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had to make after my dog decided to “have a snack” on my KZ ZSN PRO 😅, i was lucky to catch him before he completely destroyed the IEM, but he managed to chew the nozzle off.
It should work on every KZ model that have lost the nozzle.
⚙Settings⚙
0.4mm Nozzle
0.08mm Layer Height (It has to be that small as the model is too tiny and the detail are necessary for a good and secure eartip fit.)
Supports: Not necessary, but if you're not sure if your printer are well calibrated you can enable it, use Grid type, from build plate only.
Brim: Yes.
Material used: PLA
Positioning example on the second photo.
🛠Installing🛠
Put a little dab of superglue on the tip of the printed nozzle and insert it on the IEM while twisting to make sure the glue spread evenly and make a good bond.