1 / 6
Adjustable 0-45 deg rotaing angle joint for rods with high static load
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative to ball joint. Made for boat tarpaulin cover A-shape frame to adjust the contact surface angle. 44mm rod.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Variable angle joint leg for rods with high static load
- Made for boat tarpaulin cover frame with A-shape.
- Rotate the parts to set an angle between 0 and 45 degrees.
- Made with additional holes to increase strength.
- Additional ring between the beveled discs for strength.
Printing
- PETG/PLA/ABS will probably all work fine.
- Lower part marked with TPU can be made using TPU or any other material.
- Print all parts with the flat sides down.
- No supports necessary.
- Set number of walls to the desired strength.
Assembly
- Click the parts together.
- Set up to be loosely locked together.
Use
- Rotate the two beveled disc parts to adjust the set angle.
Example wheel
- Clas Ohlson gray PLA
- Polyalkemi TPU 95A – Flexible Transparent