1 / 6
Adjustable 0-45 deg rotaing angle joint for rods with high static load
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative to ball joint. Made for boat tarpaulin cover A-shape frame to adjust the contact surface angle. 44mm rod.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Variable angle joint leg for rods with high static load
- Made for boat tarpaulin cover frame with A-shape.
- Rotate the parts to set an angle between 0 and 45 degrees.
- Made with additional holes to increase strength.
- Additional ring between the beveled discs for strength.
Printing
- PETG/PLA/ABS will probably all work fine.
- Lower part marked with TPU can be made using TPU or any other material.
- Print all parts with the flat sides down.
- No supports necessary.
- Set number of walls to the desired strength.
Assembly
- Click the parts together.
- Set up to be loosely locked together.
Use
- Rotate the two beveled disc parts to adjust the set angle.
Example wheel
- Clas Ohlson gray PLA
- Polyalkemi TPU 95A – Flexible Transparent