Search results: angled

ANGLED LEGO Bricks

NEW RELEASE !!! All angles included 15° 30° 45° 60° 75 90° Step files are added in case of tollerance issues Leave a comment if you want/need adjustments

Lego Compatible (30407.dat) Hinge Plate 1 x 8 with Angled Side Extensions and Rounded Underside Frame

This model is compatible with the lego system.

Silly Shell Angled 4x Elite

Angles 4 elite dart chambers outwards and separates their chambers to reduce air leakage. Pinches darts so don't leave them loaded. Print with support on the inner separator. 5-21-25: added variant with a central supporting pillar to help…

Qidi Plus 4 Angled Spool Holder Adapter for TPU Top Loading

I didn't like other angled spool holder options for TPU. The other models used way too much filament and were overly complicated. This prints in 45 min with ~23g of filament and works great with the original qidi spool holder parts. No…

Raspi Camera Mount angled (Anycubic i3 MEGA)

This is a remix of the Raspi Camera Mount by FoxPrint3D. I didn't really like that sharp 90° edge, so i made an angled version. The overhang is still printable without supports on any normal printer. I also mirrored the part to fit on the…

Dish Rack Angled Feet

I needed a way to angle my dish rack so that it would drain properly. The top of the feet are concave to allow the existing feet on the dish rack to fit snug. These are made for this dish rack from Walmart. Printed with PLA, 20% Gyroid…

Hot Rod Flames Telecaster Plate - Straight & Angled

🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…

Meade ETX-90 Finder Scope Angled Sidemount

One of the frequent complaints about the Meade ETX series is that the finder scopes are virtually impossible to use because of how close the standard mount is to the eyepiece and the barrel of the scope. This mount fixes that. First,…

Gridfinity Angled Dual Scissors Holder

Simple Gridfinity Angled Dual Scissors Holder. Angled for easy closing of storage drawer. Printed on Bambu X1C using Bambu basic blue PLA filament as pictured.

Angled bookshelf speaker stand

This speaker stand angles at 18 degrees and accommodates speakers of approximately 120mm x 110mm (I made it to fit these Ohayo speakers (non-affiliate link) that I purchased). It's the almost the same thing as 3DLayerMaker's model, just…

Gridfinity angled polaroid holder

this updated design adds an angle to the original design and adjusts the overall angle to work better for desk viewing

MultiBoard: Parametric Angled Bottle Holders (Bolt-locked)

Fully parametric, angled bottle holders, designed for MultiBoard via bolt-locking to snaps. Quick guide: open in Autodesk Fusion, edit starred parameters, export either the odd or the even variant. Print as a single object (do NOT split…

Vesa75 Angled Top Mount

This mount is designed to hold a 15.6 inch monitor underneath a wallboard on my desk. Hardware needed: 4x M3 Washer 4x M3x8mm Hex Screw 6x M3x10mm Hex Screw 6x M3 Heat insert Maybe 1x Strip of double-sided tape to stick the monitor to the…

G3 3X Micro Prism Scope Angled Mount

Uses the m5 mounting screws preinstalled on the scope + 2x 25mm m3 bolts and nuts See second photo for recommended print orientation I printed 5 walls 40% infill with PLA Pro 20mm is ~original height (~45mm from top of rail to center of…

Angled external LCD mount for Mk3s

I just added a couple of pieces and cut them at an angle. I also reversed the slots for my use scenario. Thanks to the original author for including the fusion file, which I also include. Enjoy!

Laboratory Test Tube Basket Stand – Angled Drying & Pre-Drain Support

This laboratory stand is designed to hold a standard test tube basket at an angle while test tubes are collected after experiments. Instead of placing the basket flat, the stand keeps it tilted so remaining liquids can flow out of the…

Angled Govee LED Light Strip Accent Lighting Mount With Holes for Securing Down

I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…

Single Load Block for Angled Talon Magwell for Kirin

Converts the Kirin angled talon magwell (from Shellington Labs) to be single dart loading. In prep for a no-mag event, I found I didn't have any old-school blasters at the right FPS. There's a single load mag block for the SLAB and that…

mk3 Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) S2S69c recessed

a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…

ANGLED LEGO Bricks

NEW RELEASE !!! All angles included 15° 30° 45° 60° 75 90° Step files are added in case of tollerance issues Leave a comment if you want/need adjustments

Angled support legs

Designed to support a control panel, raised up and at an angle.

Squares See Through Bowl - Angled

Squares See-Through Bowl - Angled This 3D printable bowl features a unique geometric pattern of intersecting squares, creating a mesmerizing see-through effect. When viewed from A side angle, the intricate latticework reveals a…

Ender 3 Angled Filament Spool Holder: A Versatile Upgrade

Slides onto rails: Many 3D printers, including the Ender 3, have horizontal extrusion rails. A sliding spool holder utilizes these rails to move the spool holder along the length of the printer. 1 hole for anchor bolt: This hole is…

Angled coupling for the Sovol SH02 for M6 Bowden fitting

I wanted to use famichu's model but with a Bowden fitting. insa- published their own remix for an M10 fitting , but I don't really like the M10 fittings since it allows the Bowden tube to move through the fitting rather than securely…

Angled Double 68x37mm Solar Cell Mount

This is a mount for two 68mm x 37mm 60mA @ 5v solar cells that presents them at 55 degrees. For my use it is intended to be mounted to the front door of a Meshtastic node enclosure where the panels are in parallel, fed through the…

Angled Multi connect M12 battery holder

Hold 2 M12 batteries at an angle for easier removal on the multiboard system

Angled Paintbrush Rest with Drip Tray

Angled brush rest to keep water away from ferrule. Attached tray to catch drips.

BeamCase - Angled Handle with optional NATO rail

These are angled external handles that fit all BeamCase variants that use the simple chamfered case panels (the default ones). These handles are very sturdy, and also act as bumpers for the case to protect it. There are two versions of…

Led strip angled roof mount

Description Plastic holders for a led strip. They are meant to hold a wooden(or other material) bar that supports a LED strip which is facing upwards. I did not want direct light from LEDs because of the low ceiling. It is made for a bar…

Silly Shell Angled 4x Elite

Angles 4 elite dart chambers outwards and separates their chambers to reduce air leakage. Pinches darts so don't leave them loaded. Print with support on the inner separator. 5-21-25: added variant with a central supporting pillar to help…

Raspberry Pi4 & Angled mount for Raspberry Pi GS or HD camera

Build a professional angled camera mount for your Raspberry Pi 4 with Raspberry Pi Global Shutter (GS) or HD Camera support. Here we offer you the STL files for 3D-printed mounting parts, which have been specifically developed to securely…

Lovesac Compatible Cup Holder w/ Wood Texture (Angled and Standard Side)

Designed to fit the angled or standard side insert of a Lovesac couch. Includes cupholder with mug cutout, cell phone holder, basket/remote holder, and shallow tray. Model includes wood grain texture. Pictures show the angled side version…

Angled Long Block for Toy Train

Angled piece for stacking on the toy train

Meade ETX-90 Finder Scope Angled Sidemount

One of the frequent complaints about the Meade ETX series is that the finder scopes are virtually impossible to use because of how close the standard mount is to the eyepiece and the barrel of the scope. This mount fixes that. First,…

Angled feet for folding clothes airer

After the old feet on our clothes airer wore through and it started scratching the floor and leaving rust stains, I designed new feet that are correctly angled to sit flat on the floor.

Angled desktop stand

I’ve designed a holder for a 5 mm thick plate, positioned at a slight backward angle for optimal support or display. The underside features three recessed cavities fitted for 8 mm rubber pads to protect the surface beneath. Additionally,…

Qidi Plus 4 Angled Spool Holder Adapter for TPU Top Loading

I didn't like other angled spool holder options for TPU. The other models used way too much filament and were overly complicated. This prints in 45 min with ~23g of filament and works great with the original qidi spool holder parts. No…

Star-spangled Christmas tree

Unveil the true spirit of the holidays with our dazzling tree-shaped ornament infused with a cosmic constellation of stars . This is more than a decoration — it’s a micro-universe of winter magic , transforming any space into a realm of…

Cat tangled in Christmas lights

This ornament can be printed flat with an ams or filament changes at certain layers. if printing by doing filament changes follow these heights: start with black @ 1.2mm change to white @ 1.6mm change to red @ 2.0mm change to green @…

X-Shot Longshot angled Foregrip - Heatset Inserts

The hole is 3.7mm wide by 4.6mm deep. Make sure your inserts are about 1mm wider than the hole (so there's plastic to grip) and not as deep.

Gridfinity Skincare Serum Holder | 60° Angled Display

Elevate Your Skincare Setup This is a Gridfinity-compatible serum holder designed specifically for skincare enthusiasts who want to organize their vanity without sacrificing aesthetics. Unlike standard flat storage blocks, this model…

SKÅDIS Nintendo Switch Game Holder (Angled, Vertical)

This model is a vertical Nintendo Switch game storage unit designed specifically for IKEA SKÅDIS pegboards . It holds cartridges at a steep angled orientation —approximately 67.5 °—providing good visibility while keeping games secure and…

Hot Rod Flames Telecaster Plate - Straight & Angled

🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…

Label Holder for Husky Toolbox - Angled & Removable 3D Printed Labels

This model was made in collaboration with @SteveB_1401066 whom had partially redesigned the holder to allow for 3D printable labels that can be inserted into the label holder. I was able to reformulate the design with his guidance and…

Super Drum 34/45/70 angled talon neck

The assembly process is practically the same, just put one angled dummy as the first one and other 6 dummies should be the standard ones. From my tests the 34 round version feeds very reliably in my worker phoenix 2.0 on max rate of fire,…

Dell WD19 Angled Stand

The Design The standard Dell Docking stations sit flat on the desk. This often makes it awkward to plug in USB devices at the front, and stiff cables in the back tend to push the dock around on the desk. The solution was this angled dock…

Single socket back box, angled desktop (uk)

Single socket back box, angled desktop (uk)

Polypipe UFHSMARTRFW Thermostat Angled Tabletop Stand

I wanted a simple stand to have my polypipe thermostat stood up on the sideboard, so I made one. It slots in pretty nicely too - enjoy!

Tangled tail cats - Wall decoration

Design Concept The design features two cats with intertwined tails, creating a harmonious and elegant wall decoration. The silhouette style emphasizes the simplicity and beauty of the feline forms. Use This piece serves as a decorative…

Angled Flutted Flower Vase

print with white marble -> be happy

xTool F2 angled low-profile exhaust pipe/tube adapter

A low-profile exhaust pipe/tube adapter adapter (75 millimeters) for xTool F2 (and maybe xTool F2 Ultra) for all small home owners. Pipe tolerance are the same as the official xTool pipes. To avoid tolerance distortion I suggest to print…

M-LOK Angled Vertical Foregrip – Short Tactical Grip (AR15 / Airsoft)

Angled Vertical Foregrip (M-Lok) This is made in Shapr3D. Low-profile angled platform with ggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future. I'm adding a 3mf and stl file…

Angled Speaker Stand with Open Area

Hello everyone! Here are some speaker stands I've created to angle your speakers towards your ears. Unlike existing speaker stand models, mine have an open area where you can fit hardware like Dac / Amps (as I have features in the…

Angled Gap Spacer for Sunlu S2 Filament Dryer

This is a remix of the Gap Spacer for Sunlu S2 Filament Dryer, with angled hole

Heat Bed Angled Handle Scraper

A selection of various heat bed scrapers with angled handles that get the blade of scraper on the heat bed for easier removal of prints and support material. The full set fits in this tool holder. Handle angles are 0, 20, 30 and 45…

Angled wall mount / bow holder

I got a new bow, and needed a place to store it above the other one, but wanted to try another mount shape I guess anything less than 10mm thick / 30mm deep would also fit ;) Inspired by this model =>…

MLOK Angled Vertical Foregrip using Magpul OEM hardware

Remixed from Recticle's Angled vertical foregrip (Originally on Thingiverse). This is just the same but I adjusted the diameter of the holes to fit Magpul OEM MLOK hardware. Good for anything MLOK, whether it's a firearm or an airsoft,…

Angled Post-It Note Holder with Pen Stand

This stand allows you to house your post-it notes at a convenient 15° for easier viewing. In addition, you can use it hold your pen, including larger pens like the Twsbi Eco Fountain pen (as pictured). This stand is inspired by the model…

Universal Angled Faucet Hose Adapter

The Universal Faucet Hose Adapter is a mechanical coupling device designed to connect hoses to faucets with varying outlet geometries and connection standards, like for garden hose or narrow silicone hose. The adapter supports attachment…

AWithZ P60F Spot Welder Angled Stand

Inspired by diy500amp.com but I needed additional space for accessories. It's a modular build. If you need all parts, after printing glue them together.

Honeycomb Wall (HSW) Angled Tweezer holder

This is a simple angled tweezer holder for the Honeycomb Storage Wall (HSW). Having them at an angle allows me to fit it more closely to other items on the board, and get to the tweezers easier. It fits the typical 13.5mm peg hole No…

Creality HI light bar clip on angled

Clip on arms for led light bar Tips angled backward so the light doesn’t shine at you

Gridfinity Angled USB Adapter Holder

Holds 6 angled USB adapters

Moza SRP-Lite Angled Spacers

I modeled this to angle my pedals on a wooden platform I made, the models listed are at 15° and 22° from the FLOOR, the pictures show the 22°, you need to lift the back 1.5in and 3in for the 15° and 22° respectively, that being said you…

Aeroponic Tower Plant Pod, Angled For Water Catch, Clip-In Design, - 3D Printable STL File

Clean up your setup with this perfectly-fitted Aeroponic Tower Plant Pod, Angled For Water Catch, Clip-In Design, Vertical Garden Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ…

Ender 3 V3 SE Right Side Raspberry Pi Camera Mount - Angled

This is a remix of the original camera mount by Andy. While the original design is great, I needed a specific angled view to get a better perspective of the printing surface and nozzle during the print. Key Improvements: Optimized Angle:…

Newmar New Aire Front Speaker Angled Spacer

This is for a 2021 NMNA JBL front speakers. The front speakers are directional and point down. This angles the speakers a bit while using the original screws and provides better acoustics. I also discovered when removing the speakers that…

Wago 221-415 Angled Din Mounts With Voltage Labels

These are great for any situation where you want to use WAGO 221-415 to manage your AC or DC wiring and want to know your voltages at a quick glance. I am not the original designer of this, but i did modify it to add support for the…

Angled external LCD mount for Mk3s

I just added a couple of pieces and cut them at an angle. I also reversed the slots for my use scenario. Thanks to the original author for including the fusion file, which I also include. Enjoy!

Angled bookshelf speaker stand

This speaker stand angles at 18 degrees and accommodates speakers of approximately 120mm x 110mm (I made it to fit these Ohayo speakers (non-affiliate link) that I purchased). It's the almost the same thing as 3DLayerMaker's model, just…

Angled Baseboard Extension Cord Clip

A clip to hold an extension cord against the wall flush with the top of the wall trim. Installed this long outlet strip in my living room, cause my house has almost no outlets, and wanted a way to keep this cable out of the way, and make…

AM6 angled intake

material petg 8 perimeters 40% infill in testing petg

Angled Keystone Panel for a standard data cabinet - 14 ports

A quick angled keystone panel I threw together to replace the ancient Hills Home Hub patch panel that was in my home. Uses two M4 screws to screw into the peg hold backing mount.

Compact Angled Hex Pen Holder – Minimal Desk Organizer

Compact Angled Hex Pen Holder – Minimal Desk Organizer A compact pen holder designed to keep pens easy to grab while staying stable on the desk. The hexagonal slots are angled outward so pens are easier to see and grab, while the…

Gridfinity and Flat bottomed R8 Collet Trays 6x4 and 3x4 Angled

This is an R8 collet tray. Tapered holes hold collets precisely. The top/bottom printed separately and press fit. Models for both gridfinity and smooth bottomed bases included. Parts have been designed with slopes and chamfered to be…

Sturdy Angled Desktop Organizer

Sturdy Slanted Desktop Organizer Keep your workspace clean and tidy with this spacious desktop organizer. It features 45-degree angled shelves, making it perfect for pens, markers, tools, or even makeup brushes. The items slide to the…

4010 Blower Cooling Duct Angled Down with Straight Fins

This blower fan cooling duct is angled down and straight out. Printer: ANY Nozzle: 0.4 mm Line Width: 0.30 mm Layer Height: 0.10 - 0.20 mm Speed: You pick speed for best printing Filament: ABS, ASA, PCTG, PETG, etc.

45° Angled Square Profile Mount for DIY Plasma Torch Linear Rail

45° Angled Square Profile Mount for DIY Plasma Torch Linear Rail Description Need a precise, affordable linear guide for your plasma cutter? This model allows you to rigidify a standard square steel profile (like 40x40mm) at a perfect…

ErgoGrip Bed Scraper – Angled Edge + Knurled Handle (No Bed Damage)

ErgoGrip Bed Scraper – Designed for clean, safe print removal This scraper is built with a precise edge angle to slide under prints easily while minimizing damage to your build plate. The knurled handle improves grip, giving better…

Wall Hook Angled

Angled C245 Gridfinity holder

It holds ~14 C245 tips. It could theoretically hold more if the angle became steeper moving backwards, which would avoid hitting the back wall and let the rows "overlap" a little bit internally. But I don't have enough tips to justify…

US style angled keystone plate

I would recommend printing at a 45 degree angle with tree supports

Angled drill driver

Angled 20mm drill driver

USB-C Cable Angled Holder

Holds a usb-c to 3.5mm aux adapter at an upward angle so I can angle my measurement microphone without holding it myself. This fits an anker usb-c to 3.5mm aux adapter but it will fit any that have a 3.5mm diameter 40mm length cable with…

HexaDrain Soap Dish – Self-Draining Honeycomb Hexagon Soap Saver with Angled Base

Keep your soap dry, clean, and long-lasting with this modern self-draining hexagonal soap dish featuring a smart honeycomb insert and angled base for efficient water flow. The inner honeycomb grid platform lifts the soap above the base,…

LFG - Worker Inspired Angled Foregrip

Commissioned by @Thanhtacles Simple straightforward angled foregrip, modeled in the style of the popular Worker branded foregrip. Print orientation should be straightforward Make sure to post makes! Has two options, retaining pins, or…

Angled Perforate PTFE slot plugs mod for the INBXX

I made this because my INBXX has 5x1kg narrow rollers on the upper shelf, and 2x2kg+1x1kg wide rollers on the bottom, and I wanted my PTFE tubes to be further apart when they exited my INBXX.

G3 3X Micro Prism Scope Angled Mount

Uses the m5 mounting screws preinstalled on the scope + 2x 25mm m3 bolts and nuts See second photo for recommended print orientation I printed 5 walls 40% infill with PLA Pro 20mm is ~original height (~45mm from top of rail to center of…

Angled Space Saving Stand for the YLL IH 3.0

I like to have my YLL IH 3.0 at an angle: it helps with camera shots, it reduces passive terpene loss during heating by angling the rising heat away from the material, and it saves space on a surface. I designed this little captive…

AdaptCase – OLED 0.96" Parametric Enclosure - Plain and angled

📟 Overview A clean and compact parametric enclosure for 0.96" OLED displays (SSD1306 type). Designed for embedded and IoT projects where you want a professional-looking output device instead of exposed electronics. 🧠 Why this exists Most…

Horizontal and angled foregrips for right handers and left handers

Angled (22.5 degrees) and horizontal foregrips. Left handed? No problem!

Angled PowerJet Nozzle

A slightly angled and constricted nozzle for my PowerJet Leafblower. I angled the nozzle Slightly to make it easier to aim the airflow paralel to the ground and made the opening a bit smaller hoping to achive a little more pressure and…

Angled Wallmount for iPad 7th/8th/9th gen

I made this Wallmount for the iPad 7th gen. Should also fit 8th and 9th gen I made the fitment a bit tight so nobody could just pull it out. (still possible with force but be careful)

Fixed Angled Ceiling Mount for Canton Speakers

Fixed Angled Ceiling Mount for Canton Speakers This is a sturdy, multi-part ceiling mount designed for Canton speakers. It features a fixed downward angle to point the speaker perfectly toward the room. Note: I designed this for a friend…

SSUPD Angled Feet (40mm tall)

Designed my own feet for the SSUPD Meshilicous as I wasn't a fan of the printable options from SSUPD's website or anything I could find on line. The main issue I wanted to mount a 140mm on the bottom of my case for more airflow, so I…

Angled Remote Control Stand

This is a stand with four angled slots for remote controls. The slots are 13.5/28/37/37mm deep, and about 46/48/51/56mm wide (rounded down); don't forget to measure the width and thickness of your remotes to make sure they will fit. The…

Logitech G29 / G920 Angled Mount

These extra feet make it possible to mount the Logitech G29 / G920 for a better feeling when gaming with a lower chair setting. Assembly Apply double-sided tape to the positions as shown in the picture below. left: top feet, right: bottom…

Angled wall-mount bracket for Lutron Caséta motion sensor

This angled wall-mount bracket for your Lutron Caséta Smart Motion Sensor (PD-OSENS or PD-VSENS) allows you to set it up at an angle on a flat wall. In the second picture, you can see the original and my angled version side by side. So…

Angled 2020 mount for 8mm LED strip - 300mm length

made for my sapphire 5 plus using 8mm led strip

Angled Speaker Stand

Works well with Sony SS-CS5 Book Shelfs