69 modeli
I would love to see everybody's remixes. The inside diameter is: 20mm The outside diameter is: 25mm I've uploaded the FreeCad file so its easier for you to edit the ring size. Print settings: I wouldn't recommend Prusa slicer for this…
I create a lot of beveled items but this lightning bolt was too cute to save just for myself! The images attached were printed on my MK3S+ with .2 mm layer height, 20% infill. Gold PLA filament from Hatchbox. I like the thicker look of…
Same picks as Mikolas' but with a slight bevel or fillet all around the pick. This gives a more “on point” and deep sound and is more comfortable in my opinion. There's also a travel pick card for these picks here:…
A remix of this handy guitar stand (for up to 12cm thick guitars), but with some beveled edges so that it's less jarring. I'm not great at blender, so I apologize that the bevels and edges aren't perfect. If you like my work, feel free to…
Earrings in the shape of the Triforce artifact from The Legend of Zelda. Power, Wisdom, Courage! Print one for each ear! The earrings in the photo were printed with Noulei Silk Antique Gold, and the top surface was ironed with Cura. The…
This model is compatible with the lego system.
This replaces the plain metal plate on one end of the stone holder with a beveled holder that will hold mounted stones much more securely. The EdgePro style stones are mounted. This was tested on my RX-009. Updated January 20, 2024 Added…
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…
I printed mine flat with some ironing, there's no need for any support.
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
This gear breaks in most Duplo trains, the original one breaks and starts slipping, and the train can no longer run. Print this in PLA, and replace the original. Video on youtube (not mine) on how to open up the train and replace the…
The sign as seen in the American “The Office” TV show intro.
I had a few sharp edges when I printed the original part. Apparently it's simpler to edit the part than properly level my bed. Blend file included. Print Settings Rafts: No Supports: No Resolution: any Category: Other
A beveled calibration cube that is 20mm in all axes. Enjoy! -Please help me by downloading and liking this model, its free! It would be REALLY appreciated.
https://www.thingiverse.com/thing:3799899 provided a good base for a beveled version. Thank @tafische! Prints well in PETG. More closely approximates the logo on my Catalina 22 from the 80s. Updated with simplified version. Print Settings…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
Printing with 10% infill is still pretty sturdy, but you can print higher infill for heavier items like monitors or whatnot. If you've ever had trouble desk mounting things like microphones or monitors to the Apex Elite Series Desks…
This is a set of standard plain mini bases in many different sizes for miniatures wargaming. This is the typical beveled edge style mini base, in a couple of variations. Plain Plain with magnet hole cutouts (2x5mm disc) Inset 1mm down…
A remix of the humidity holder to fit the ones with a beveled face from the likes of AliExpress . I recommend printing 2 of these (one for each end) as it holds it very securely. Easy print with no supports if printed on its side.
Made a simple remix of this Tampon dispenser by Kabauter. I rounded off the front, where you take out the tampons, for a cleaner look and better user experience. The back of it has a slope, that would need support, I didn’t want to bother…
A smooth-shaped heart with a flat back that can be scaled to any size. Perfect Valentines decoration. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Discover the convenience of the 3D Parts Box! With a round design measuring 100 mm in diameter and 25 mm in height, this box features six beveled compartments for easy retrieval of small items. The interlocking lid ensures the safety of…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
Recently i have been printing Leedle Dynamic's blasters but when i used cheap converted X-shot darts they just got stripped apart. to counteract this, I made and tested this model until i cam to this design. the tip is beveled to allow…
ME 370 Motorshaft Gear. Holes on the left and right are toleranced to fit an M3 screw snugly on each side, and the hole in the middle is meant to account for any extra motor shaft not taken care of by the shaft collar it gets mounted to.…
slides into end of l track to provide a smooth transition from floor to beveled l track 100% infill temperature resistant material
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
Bonsai pot 30 hexagonal beveled 182x182x69mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
I wanted to install solar lights on the tops of the posts on our deck. The posts were nominal 6" X 6". Most "add-on" solar lights are designed to be installed on posts with flat tops. Some posts, like ours, have a beveled top. This…
The original by Mike DaSilva was almost exactly what I was looking for. I'm using it as a plug for one side of the Bambu Lab Over-Engineered Y-Splitter (https://www.printables.com/model/298958-bambu-lab-over-engineered-y-splitter). Added…
Added 5mm bevels to the mouth of the band holder to support different band styles. This is a remix containing a number of STL files to support 1, 2, 3, or 4 band holders printed as a single part. Remixed from the listed Thing, but I do…
This is the 5mm pin from secv's Minimized Cable Winder just edited to have a little bevel on the edges that are in direct contact with the cable. The idea is that “less edgy” edges would lower the risk of damaging the cable with constant…
Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Some parts for the PrintNC have bevels on the axis that you're instructed to print them on, which makes them difficult to print with ABS. These models have been oriented and de-beveled on the build surface side. Category: Robotics
Because my sink is slightly elevated and not flush with the counter, I needed this contraption to raise the tray just a little. Link to said tray: https://www.printables.com/model/212498-kitchenbathroom-draining-soap-tray
Fits my Grizzly G0513 saw pretty well. Takes a little bit of light sanding to get it perfect. I usually print it a tiny bit taller, like 103% ish on Z. Narrow version is just a little more support, and I never bevel the table. Category:…
My desk always gives me problems as most smarter people than me spend their money on flat, non-beveled desktops that make clamping stands, cupholders, and other items very easy. I made this to prevent a coffee disaster. The adapter…
Parametric OpenSCAD program for beveled oval or round bases for miniatures. You can find the code here: https://gitlab.com/tgodden/bases-with-border Make sure to also clone the submodules, since the program uses the bioinfscripts library…
This was printed in PETG but other types of filaments should work fine maybe a bit more brittle in PLA. It it mounted with white RTV silicone and some masking tape to keep it in place while drying.
I like @ dzieciolmaciek 's paper towel holder, but needed something that would not fall off my beveled shelf. Please attribute dzieciolmaciek on any future remixes.
This is small modification to the beveled hygrometer holder. @cryptomilk commented that the model works much better with a small cylindrical nub on the clip that attaches to the dry box roller base, but didn't provide an STL. I created an…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a clean, no-fuss mount design for 2" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter mixes, cleaner…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A smooth-shaped heart with a flat back that can be scaled to any size. Perfect Valentines decoration. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Hlavní změna spočívá v horní ploše krytu, kterou jsem upravil do kónusu s mírně zaoblenými hranami. Původní model je super, ale při opravdu krajní pozici ramene stále ještě docházelo k zachytávání svazku kabelů a PTFE. Díky kónusu se…
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Storage Boxes with beveled edges in different sizes: 3 different sizes, you can additionally scale them as you want in slicer. 173x99mm 210x150mm 273x173mm Print as is, add brim to avoid warping. Printed with Elegoo Rapid PETG white (matte)
Simple plug-and-play design. No supports needed and is expandable to any size fitment you need.
Hlavní změna spočívá v horní ploše krytu, kterou jsem upravil do kónusu s mírně zaoblenými hranami. Původní model je super, ale při opravdu krajní pozici ramene stále ještě docházelo k zachytávání svazku kabelů a PTFE. Díky kónusu se…
Print Settings Print at a higher infill for a heavier dice If printing at 100% infill, add a brim to prevent warping. If you want all the sides to print identically, print on a chamfer with a brim of 3mm or more Print with .2mm layer…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
