1 / 10
Ubiquiti Unifi G4 Doorbell Pro Wedge Mount Unterputzdose flush mount box — zdjęcie 1
1 / 10

Ubiquiti Unifi G4 Doorbell Pro Wedge Mount Unterputzdose flush mount box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for mounting G4 to flush mount box in wall.

Ocena
0 / 5
Polubienia
5
Pobrania
33
Wydruki
0
Wyświetlenia
452
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a 30° Ubiquiti Unifi G4 Doorbell Pro Wedge Mount. It is designed to mount the doorbell to a German 60mm flush mount box in the wall (Unterputzdose in German). It also contains a slanted roof to protect the doorbell and move rain off to the side. 

Setup: 

The slightly smaller Base plate gets screwed to the wall box with wall box M3 screws (those holes are 60mm apart). On the back of this Base plate I inserted M4 drive-in nuts, so you can then screw the Front plate to the Base plate with M4 screws. The front plate sits over the Base plate, which is then invisible. 

The Front plate also contains M4 drive-in nuts, at an angle for the Doorbell plate to be fastened to the Front plate. The doorbell then clicks into that. 

I printed in ASA Jet Black with the models flat on the printbed and the Front plate with support. 

Tagi