1 / 10
Ubiquiti Unifi G4 Doorbell Pro Wedge Mount Unterputzdose flush mount box — image 1
1 / 10

Ubiquiti Unifi G4 Doorbell Pro Wedge Mount Unterputzdose flush mount box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount for mounting G4 to flush mount box in wall.

Rating
0 / 5
Likes
5
Downloads
33
Makes
0
Views
455
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a 30° Ubiquiti Unifi G4 Doorbell Pro Wedge Mount. It is designed to mount the doorbell to a German 60mm flush mount box in the wall (Unterputzdose in German). It also contains a slanted roof to protect the doorbell and move rain off to the side. 

Setup: 

The slightly smaller Base plate gets screwed to the wall box with wall box M3 screws (those holes are 60mm apart). On the back of this Base plate I inserted M4 drive-in nuts, so you can then screw the Front plate to the Base plate with M4 screws. The front plate sits over the Base plate, which is then invisible. 

The Front plate also contains M4 drive-in nuts, at an angle for the Doorbell plate to be fastened to the Front plate. The doorbell then clicks into that. 

I printed in ASA Jet Black with the models flat on the printbed and the Front plate with support. 

Tags