New Alfa Giulietta Battery Terminal Cover/Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An all new design of positive terminal cap/cover for Alfa Romeo Giulietta
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This positive terminal cover is designed for Alfa Romeo Giulietta 2010 → and fits most of the G's out there.
The design is based on the OEM look, and made a bit more simple for 3D-Printing.
I fits right in so no rattling or loos cover.
I will recommend printing in ABS, PETG or other heat-resistant filament.
You can print it standing, if you want the strongest clips as possible! Just make sure to enable support, and remove ALL support material for best fit. Print at 100% infill for best stiffness.
Print it faced down (turned 90deg). This will result in an easier print, but weak clips, but you can disable support and use 2-3 walls and 3-5 top button layers and around 20% infill. Use 0.4 nozzle or smaller and Line Wide 0.4 or smaller, for best result.
Please leave a rating/comment if you like the model :-)
Happy printing!