AGPtEK HD Video Capture VG0020 Mount & Replacement Record Button

A friend of mine gave me a box of stuff and this thing was in there, so I made a mount for it. A couple differences in the picture and the final upload here. In the back, it was not sitting flush against the back wall for one. I (hopefully) fixed that. The opening in the back was not lined up properly in my original print either so I just tore mine away with pliers to ensure different sizes of HDMI cords will be able to fit. This has also been corrected in the final version uploaded here. The bottom wall in the back has also been raised 4.2mm on both the top and bottom to make it more durable. 

Screw size is 4.6mm for the through hole and 9.4mm for the head. I used shorter flat-top wood screws. 

I intentionally left the front stick out of the mount so you can see the dim activity light they have in this thing. I have made the final version 2mm longer to allow the feet to have a more proper grip rather than tilting the box forward toward the floor. The final version is also 1mm thicker on the bottom because what is the point of mounting it if it's going to be chintzy? 

Also included is a replacement record button for the defective one they had in place. I think I read at the time I got it that they stopped selling them in this way because of this defect. Turns out that it wasn't only the button having that scummy rubber feel to it causing it to stick but the button itself inside is on a tilt and placed too high. 

I think that's about all there is to say about this thing. Basic model for a light weight thing. Mount it, forget about it. Enjoy.

I'm on the YouTubez.

My Ko-fi if you so desire to help feed some stray kitties.