SINCGARS Antenna attachment for 2" Hitch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2" hitch attachment for AS-4266A/PRC 8' antenna. Made in Fusion 360.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello! While preparing to go on a road trip and wanting to bring my MARS-modded Xiegu G90 along for POTA/SOTA/CB operations, I needed an antenna adapter and wanted to use the 2" trailer hitch on my 2012 Ford Escape. Not wanting to buy a pre-made part, I designed it in Fusion 360 in about an hour.
This is my first part in Fusion, coming from a casual and frustrated Blender experience.
It is designed around the SINCGARS AS-4266A/PRC 8' antenna, which had been thrown out and rescued from a dumpster. The top hole is 29mm, about ½ mm larger than needed to fit the antenna base. The bottom hole is 15.875mm to allow for a female BNC coax connector to connect.
I'd assume this would be best printed in PETG.
WARNING: I have yet to make this.