SINCGARS Antenna attachment for 2" Hitch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2" hitch attachment for AS-4266A/PRC 8' antenna. Made in Fusion 360.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Hello! While preparing to go on a road trip and wanting to bring my MARS-modded Xiegu G90 along for POTA/SOTA/CB operations, I needed an antenna adapter and wanted to use the 2" trailer hitch on my 2012 Ford Escape. Not wanting to buy a pre-made part, I designed it in Fusion 360 in about an hour.
This is my first part in Fusion, coming from a casual and frustrated Blender experience.
It is designed around the SINCGARS AS-4266A/PRC 8' antenna, which had been thrown out and rescued from a dumpster. The top hole is 29mm, about ½ mm larger than needed to fit the antenna base. The bottom hole is 15.875mm to allow for a female BNC coax connector to connect.
I'd assume this would be best printed in PETG.
WARNING: I have yet to make this.