Beer / Soda Can Solutions - Fly / Mosquito Trap - WIP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Project scope: create yet another fly / mosquito trap based on an empty soda can 330 ml version. Work in progress
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
WIP - Bug trap based on 330 ml contained - beer or soda can - that can be cut on the top part…preferably after consuming the delicious beverage :D.
I designed these parts from scratch after looking for models and inspiration across other platforms and models…coming up just short of what i wanted.
I included a half section of the top lid, for a quick fitment test.
All parts intended to print in PETG, but other outdoorsy materials should do just as well.
Two models - v1 & 2 - center access hole 2.5 mm, meant for mosquitos.
V1 - rectangular vents - requires more than 40% cooling for better inner funnel surface quality.
V2 - round vents - prints decent.
Two iterations - v1.1 & 2.1 - center access hole 3.5 mm, meant for flies.
The barrel is this one > https://www.printables.com/model/464182-beer-can-barrel