WAGO 221 holder – 3x2, 3x3, 3x5 versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact WAGO 221 holder. Mounts with 2 M3 screws hidden under the connectors. Versions: 3x2, 3x3, 3x5.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Flat-mount holder for WAGO 221-412 / 413 / 415 connectors – great for securing them to a mounting panel, enclosure, or wall.
Available in six versions:
🔸 Standard (angled profile):
3x2 – for 3x 2-wire WAGO 221-412
3x3 – for 3x 3-wire WAGO 221-413
3x5 – for 3x 5-wire WAGO 221-415
🔸 Light (fully flat design):
3x2 light
3x3 light
3x5 light
The light versions are thinner, with no angle – perfect when height and simplicity are key.
The holder uses two M3 screws, completely hidden underneath the inserted WAGO connectors, making it clean and compact.
📦 Perfect for:
electrical cabinets
furniture panels
prototyping setups
🔧 Print settings:
Material: PETG or PLA
Layer height: 0.2 mm
Infill: 20–30%
Supports: not needed
Screws: M3 x 6–10 mm
📸 Upload photos of your use case – I’d love to see them!