1 / 3
Skådis ("Skadis") Adapter for Navaris Magnetic Tool Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bought a Navaris tool holder from Amazon but it did not fit my Ikea Skådis tool board. This adapter solved it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
What you need is:
- 6x M5 screws, 10mm shaft
- 6x M5 nuts (8mm “diameter”, 5mm thickness)
- <Optional> Silver tape
Instructions:
- Print it out two copies in ie. PETG (generate support material in your slicer)
- Put in the nuts in the holes. I used a 0.4mm nozzle and the nuts fit perfectly for me:

Note that if you have nylon covered ends the nylon should be outward facing
- Optionally pad the M5 screws attached to the Skadis board with silver tape at the base of the screw to reduce scratches from the threads on the Skadis board
- Remove the board from the wall
- Then attach the adapter from the back

- Hang the board
- Attach the Navaris magnetic tool holder with the remaining 2 M5 screws

Link to the Navaris magnet board:
https://www.amazon.se/dp/B07GJM2DXJ
