1 / 3
Skådis ("Skadis") Adapter for Navaris Magnetic Tool Holder — image 1
1 / 3

Skådis ("Skadis") Adapter for Navaris Magnetic Tool Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bought a Navaris tool holder from Amazon but it did not fit my Ikea Skådis tool board. This adapter solved it.

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
58
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

What you need is:

  • 6x M5 screws, 10mm shaft
  • 6x M5 nuts (8mm “diameter”, 5mm thickness)
  • <Optional> Silver tape

Instructions:

  1. Print it out two copies in ie. PETG (generate support material in your slicer)
  2. Put in the nuts in the holes. I used a 0.4mm nozzle and the nuts fit perfectly for me:
    Note that if you have nylon covered ends the nylon should be outward facing
     
  3. Optionally pad the M5 screws attached to the Skadis board with silver tape at the base of the screw to reduce scratches from the threads on the Skadis board
  4. Remove the board from the wall
  5. Then attach the adapter from the back
  6. Hang the board
  7. Attach the Navaris magnetic tool holder with the remaining 2 M5 screws

Link to the Navaris magnet board:
https://www.amazon.se/dp/B07GJM2DXJ

Tags