Shelf Holder Eriba Touring 430

This is a shelf holder for an Eriba Touring 430 caravan. The original holders do not support the shelf on the top position, since the exhaust pipe is obstructing proper fitting of the shelf board.

Thus I designed this shelf holder, fitted with push pins. I also use it for the integrated wardrobe since it is more sturdy. Should also fit other wardrobes with a hole pitch of 240+-2mm and a hole diameter of 5mm.

Print the left and right holders under 45° around z-axis, so they fit standard build plates - the parts should be correctly oriented though. As well, you need 4 of the push pins to attach them to the factory drilled holes. Use a strong profile with 0.2mm layer height and use PETG or something temperature stable, do not use PLA. The holders require some supports for the spring function to keep the board from rattling. Fit the rear pin first and then the front one - there is slack to accommodate tolerances. 

I used 9mm multiplex board, measurements taken from the original one. You need to make 2 cutouts for the exhaust and the cables. Make the exhaust cutout 20mm deeper, so you have enough space.

Enjoy - please rate and post a make :-)