1 / 3
anti-vibration feet for PRUSA printers (with K-Flex rubber pad) — zdjęcie 1
1 / 3

anti-vibration feet for PRUSA printers (with K-Flex rubber pad)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anti-vibration feet for PRUSA printers. Use with 9 mm K-Flex pad. Reduce noise by up to 20 dBA!

Ocena
5 / 5
Polubienia
15
Pobrania
39
Wydruki
1
Wyświetlenia
308
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Is your 3D printer turning your desk into a giant speaker box?
Vibrations from the printer often transfer to furniture – especially chipboard desks – amplifying noise dramatically.

This simple set of anti-vibration feet fits under standard PRUSA printer feet (MK3, MK4, MINI, etc.).

Just place your printer on these feet and apply a 9 mm K-Flex rubber insulation pad underneath. This is the same closed-cell rubber used to thermally insulate cooling pipes.

📉 In my case, on a chipboard desk, I measured:
➡ ~20 dBA noise reduction

📦 Features:

Drop-in design – no modifications to printer
Fits all 4 corners
Compact and stable
Effectively reduces vibration transfer

🔧 Print settings:

Material: PETG (recommended), PLA works too
Layer height: 0.2 mm
Infill: 30% or more
Supports: not needed
Pad: 9 mm K-Flex rubber or similar

📸 I’d love to see your photos or test results!

Tagi