Skadis Paper Towel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another paper towel holder for IKEA Skadis.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 235
- Wydruki
- 2
- Wyświetlenia
- 2213
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Once again I could not find a paper towel holder for IKEA Skadis that I really liked, or rather I printed one that did not really work, and the others I found would have required me to buy some specific tube size that I could not find.
So here we go my very own design for a Skadis paper towel holder, it uses a 12mm diameter tube, in my case I had some aluminum tube, to connect both sides and also switch out the paper towels. Any type of 12mm tube will work.
And there is a fully 3d printed version of this here, not requiring a tube or printing a tube.