Bed Levelling Shim with long handle - EnderV3 SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple shim with a long handle to help with placing the shim under the existing to help level your bed.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Use 100% infill for this as it will get compressed by the tightening of the screw.
Simply change the height of the shim as needed to level your bed in whichever slicer you use.
The best technique I've found (especially for the back left corner) for levelling the bed on my Creality Ender V3 SE is to remove the PEI plate and unscrew the screws of the sides I need to add the shims to.
I then place the Allen key tool I used to unscrew the bolts from the bed into where the screw was and then slip the shim under until I can then put the Allen key all the way through the original shim and then this model. Then I simply remove the Allen key, put the screw back in and tighten as needed.
You can then cut off the excess.
Hopefully this can help someone out as dealing with tiny little circle shims was too fiddle for my liking!