Yampad seamless case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a seamless Yampad macro pad case. It's 16.5mm high
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
List of Materials:
1. M3 screws - 5 units (read further on the length)
2. M3 heat inserts - 5 units
Notes:
I include two versions of top part: one with screw holes and one without. I found that at least for me the switches hold the case quite securely and so I only screwed the PCB to the bottom part. If you want to have it screwed all the way through - you have the option.
For the screwed top plate you will need 8mm of thread to screw in that case. If you only want to screw in the PCB -then 3mm to 5mm should do it.
Print on the photos was done with the top part with no infill so that the light isn't obstructed. It was done in ESun White PLA+