1 / 2
END CAP FOR 20MM TUBING 16mm ID
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple end cap, for 20mm tubing with a 2mm wall thickness.
- Ocena
- 4,5 / 5
- Polubienia
- 14
- Pobrania
- 146
- Wydruki
- 1
- Wyświetlenia
- 565
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (1)Kolekcje (16)Powiązane
If you have a pipe or tube with a 20mm OD and a16mm ID, this will work for you!
I'd recommend printing in PETG but I've used PLA in similar situations and had no problems, but it's a hammer fit because of those silly little ribs that have been designed to slice off as it goes in to keep it nice and firm - and they do!