Creality K1 Universal Bed Plate Guide (cryo grip, biqu, magnetic, G10, garolite)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It allows you to use any 235x235 bed plate, without cut outs. Uses stock m3 bolts.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 655
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I often print on regular magnetic bed plates and also some piecies of garolite g10. To install g10, i needed to always unscrew the two guiding bolts to put it, then screw them back when i needed to use magnetic bed plate again.
Now i don't, becouse i made an adapter, that allows me to use any of them without unscrewing anything :) Centering is easy for both types!
Also now you can use any 235x235 bed plates, without the need for custom creality cout-outs!
Print from atleast ABS/ASA if you don't want it to melt, since the bed can go up to 120 degree. I made mine from PA12-CF15.
I included two models - "235mm" and “Custom”. "235mm" is exactly 235 mm wide, but even with my printer properly calibrated, when printing it skewed on bed plate, it was too long, so i made shorter one, that after print is 235mm.
There are also models with coutout for bedplates like cryogrip!
It uses stock m3 bolts that you unscrew from the bed, so no additional parts needed! You just screw them from the bottom.
Feel free to try both!
Enjoy!