[FT Panel] Voron V0 (v0.2 in particular) side seal helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FT-panels based side clip to help seal tophat on V0.2
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After seing and implementing this sealing block on my voron 0.2 there was still a gap (probably due to added foam on panels) so to make it work I modified
FT-Panel_Bracket.stl from original model to make it push onto tophat acrylic panels as well.
To fix it to extrusion you need FT-Key.stl from the original model.
After doing mentioned sealing block and these clips (effectively everything but back panel top hinges and spool holder was replaced with TF clips from original repo) chamber heating to 45C reduced almost in half - from 79m to 40m. Considering that front door is not really airthight I think this is very good result.