IKEA Sojaböna semi-hydro planter - liner - pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA Sojaböna semi-hydro planter - liner - pot
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Self watering liner for the IKEA Sojaböna 12 cm version pot
The rim of the liner has a lip that facilitates the removal of the liner from the pot (see pictures).
Diameter of the holes for the wicks is 6 mm. A space of approx. 24 mm remains between the underside of the liner and the uppurside of the bottom of the pot (for the water reservoir).
Can be printed with PLA using a 0.6 mm nozzle (as in the pictures), no supports needed.
Since I only own the 12 cm version of this pot, I'm not able to tell if a simple resize will fit the other diameters of the same pots, if you try, please leave me a feedback. → check “Makes and Comments”
Available file formats: .3mf, .stl.