1 / 12
High Z Axis Extender for Lowrider 4 CNC – 300mm or Custom Travel — zdjęcie 1
1 / 12

High Z Axis Extender for Lowrider 4 CNC – 300mm or Custom Travel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Z-axis extender for the Lowrider 4 CNC (V1 Engineering), increasing vertical travel up to 250 mm using 300 mm linear gui

Ocena
0 / 5
Polubienia
12
Pobrania
83
Wydruki
0
Wyświetlenia
756
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this Z-axis extender to increase the vertical travel of my Lowrider 4 CNC (V1 Engineering) from around 100 mm to 250 mm, using 300 mm linear guides.

The goal was to gain more clearance for thicker materials or tall 3D workpieces, while keeping full compatibility with the original Lowrider 4 structure.
All parts are 3D printable and designed for easy installation, with no permanent modifications required.

⚠ I’m fully aware that the Lowrider design favors a lower Z height for better stability (unlike many other CNCs). However, in my case, I needed to use long tools up to 200 mm for milling soft materials like foam and polystyrene, where high rigidity isn’t as critical.

🛠 If you'd like to tweak the design, adapt it to other lengths, suggest improvements, or collaborate your feedback is very welcome!
Feel free to leave a comment or upload a remix. Let’s improve this together!

 

I did my best to design these parts based only on STL files, as I didn’t have access to modifiable CAD files (STEP format didn't work properly in Fusion 360). Suggestions or improvements are welcome!

 

⚠ Print instructions:
– Orient the part with the largest and flattest surface facing down on the build plate.
– A minimum bed size of 210 mm is required.
– Supports are required due to overhangs.
– Recommended material: PLA (PLA+ or standard).
– Layer height: 0.2 mm
– Infill: 20%+ (high strength not necessary)

Here the V3 engineering forum page: 

 https://forum.v1e.com/t/high-z-mod-lowrider-4-250mm-for-taller-bassrelief/49772

😅 I know… it's ugly – but hey, it just needs to hold things together!

 

 

 

 

Tagi