Simple Shelf for 8x2cm wooden slats
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a shelf and I had 5 extra wooden slats rough cut to ~50cm each. So, I mocked up this simple set of shelves.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple shelving system that requires just 2-5 wooden boards 8x2. I used 5 boards I already had with about 50cm each. I think you could easily go longer. The top and bottom shelf sides lock together, but this is in no way required.
Printing Instructions
I could not fit the bottom shelf onto my print bed, so I use PrusaSlicer to create a dovetail with the default settings and that worked great.
You also need to mirror the bottom shelf for the other side, but the top shelf does not need any mirroring.
I printed with 0.4mm nozel in PETG.