1 / 2
Simple Shelf for 8x2cm wooden slats — image 1
1 / 2

Simple Shelf for 8x2cm wooden slats

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I needed a shelf and I had 5 extra wooden slats rough cut to ~50cm each. So, I mocked up this simple set of shelves.

Rating
0 / 5
Likes
6
Downloads
19
Makes
0
Views
111
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Share Alike

This is a simple shelving system that requires just 2-5 wooden boards 8x2. I used 5 boards I already had with about 50cm each. I think you could easily go longer. The top and bottom shelf sides lock together, but this is in no way required.

Printing Instructions

I could not fit the bottom shelf onto my print bed, so I use PrusaSlicer to create a dovetail with the default settings and that worked great.

You also need to mirror the bottom shelf for the other side, but the top shelf does not need any mirroring.

I printed  with 0.4mm nozel in PETG.

Tags