Topton N100 ITX 120mm fan shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan shroud to adapt a 120mm fan to the teeny tiny heatsink of the N100 ITX pc. Is it needed? No. Is it cool? Yes!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
A 120mm fan shroud to replace the piddly wee fan on the Topton N100 ITX board.
I mean the tiny fan does an excellent job as it is, but you can only have a 3d printer for so long before you have to print upgrades.
You will need 4x M2.5 self tappers or similar to bite into the aluminum headsink fins.
and 4x PC fan screws to bolt it down.
Included the Fusion360 file as well incase some one wants to actually make it better, just rember give credit where credit is due if you remix it.
Pro Tip:
Dry run ‘screwing’ the 120mm fan to the shroud before you attach it to the heatsink. you want to cut any threads into your fan and the shroud while its not hanging off your board. Makes it easier, trust me.
The M2.5 self tappers will hold the shroud on fine, but i would not like to put too much pressure on it. I tried M3s and whatever pic'n'mix of PC screws i had, but the self tappers are the winners so far. Maybe some one with too much time on their hands would like to remix the shroud to make it clip on hint hint ;-) ;-)