P
Printablesideasman
Fan mount for Topton N100 fanless case
A 120mm fan mount for the “fanless” Topton N100 router PC. It lets you securely mount a fan without case modification.
- Pobrania
- 334
- Polubienia
- 35
- Ocena
- 5
Wyniki wyszukiwania: topton
Liczymy pasujące modele…
P
PrintablesJustFun2772
NAS R1 R7 Topton Aoostar Kingnovy riser for 92x92x25mm and-or 120x120x25mm fans
Another version of the riser. Now it is possible to replace the standard 92x92x15 mm fan with the more common 92x92x25 mm fan. Additionally, there is the option to install a 120x120x25 mm fan. I installed both fans, replacing the standard…
- Pobrania
- 302
- Polubienia
- 18
- Ocena
- 0
P
PrintablesPatPend
120mm Fan Bracket for Topton Mini-PC
These are brackets to mount a 120mm fan to a Topton N100 Mini-PC. No tools or hardware needed, just clip onto the fan and slide the assembly onto the heat sink grooves. The Topton N100 ran great - except for the fact it overheated and…
- Pobrania
- 289
- Polubienia
- 37
- Ocena
- 5
P
PrintablesShenaniganz
CWWK/Topton Mini PC Fan Mount
I have a CWWK Mini Fanless PC running OPNsense firewall. It gets a little warmer than I'd like with no fan, so I designed this mount to hold a fan on top of the heat sink case. The case supports an 80x10mm fan on the bottom, but the CPU…
- Pobrania
- 236
- Polubienia
- 28
- Ocena
- 5
P
PrintablesArek
Mini PC - Topton N100 i226-V - 1U rack mount
Right rack mount for Topton N100 i226-V Mini PC that takes only single 1U. One original bottom screw replaced with M3x40mm. Holds device in place. Printed from ABS with 0.2mm layer, 40% infill, 4 perimeters, 5 top/bottom layers. Design…
- Pobrania
- 220
- Polubienia
- 41
- Ocena
- 0
P
Printablesstijn
19" rack CWWK/Topton Mini PC mount 2u
this is a 19" 2u mount for the CWWK/Topton Mini PC ( https://nl.aliexpress.com/item/1005005411300587.html?spm=a2g0o.order_list.order_list_main.343.12b279d2PfxrNQ&gatewayAdapt=glo2nld ) for your rack , you'll need 2-4 m3 screws anywhere…
- Pobrania
- 107
- Polubienia
- 5
- Ocena
- 0
P
Printableschuandinh
1U 10'' Rack Mount Topton N5105 i226-V N150 N100 Mini PC
1U Rack Mount for Topton N5105 i226-V N150 N100 Mini PC
- Pobrania
- 103
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJo0
CWWK/Topton Affordable Edition (N100/N305) Riser Base
CWWK/Topton Affordable Edition Riser Base to accommodate 80x25mm fan at the bottom Combine with ZeroFlow's 120mm Top Fan mount for significant cooling benefits. Results: Stock fanless 48C 120mm Fan only 30C 120mm Fan and 80mm Fan 24C…
- Pobrania
- 96
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMrMaKr
CWWK - TopTon - Kingnovy - ChangWang - Morefine - NUC Extension - big version
Extends the Case of the China-NUCs so that you can fit a regular 25mm thick 80mm fan additionally to M.2 drives with heatspreaders. Also it is possible to add more I/O to the front and backpanel to make use of the internal headers for USB…
- Pobrania
- 93
- Polubienia
- 20
- Ocena
- 5
P
PrintablesFrAllard
Topton 120 mm fan holder for "fanless" MiniPC
Print two of these brackets if you have a MiniPC with the same aluminum casing profile used by many vendors, similar to the one popularized by Topton, as shown in the picture. Before downloading the model and printing, please measure your…
- Pobrania
- 91
- Polubienia
- 11
- Ocena
- 0
P
Printablesalessandro.calzavara
Fan mount for Topton N100/N150 fanless case
I needed to mount a fan on my “fanless” mini pc to keep it cool. As reported by the seller on Aliexpress , if you want to do more than just a router, you need to add a fan to dissipate the heat. The fan mount I've found was good but not…
- Pobrania
- 88
- Polubienia
- 8
- Ocena
- 5
P
Printablesandabata
Topton / Minipc modular extender
Extend a minipc to house an additional fan / harddisks. I used threaded rods to tie it all together.
- Pobrania
- 88
- Polubienia
- 10
- Ocena
- 0
P
PrintablesNikolica
- Pobrania
- 79
- Polubienia
- 6
- Ocena
- 0
P
Printablestn00364361
Dual SATA SSD mount for CWWK/Topton X86-P5
Material: PETG, ABS, or ASA Two parts need to be printed: Pegs facing upwards Pegs facing upwards, mirrored along the Y axis No support required 0.20mm layer height You should be able to reuse the original 4 screws to assemble them. The…
- Pobrania
- 79
- Polubienia
- 5
- Ocena
- 0
P
Printablesvrsn3ptoh
Qotom/Topton Quad NIC Firewall 10" 1.5U Rack Mount
Rack I made to hold an old Qotom quad NIC PC I've been using as a PFsense box for years. Designed around the space as the top of “Modular 10 Inch Server Rack - Reworked”, which is technically 1.5U but eats into some of the vertical space…
- Pobrania
- 67
- Polubienia
- 17
- Ocena
- 0
P
PrintablesJwidess
Topton Fanless Mini PC - Fan Mount
This is a fan mount for a Topton Fanless Mini PC. It allows you to mount a 60, 70, 80, or 90mm fan to an X2B (N5105 or N5100 CPU) Model Topton Mini PC. My device, running OPNsense even at only low load, was averaging around ~74C. With…
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRoman
Topton Fanless Mini PC - 120mm Fan Mount
Jwidess's mount by stretched to fit 120mm fan at most distanced holes
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 0
P
PrintablesHuy
Topton router/firewall custom bottom cover
So I wanted to build a compact all-in-one router + server solution for traveling, and this is the best x86-based mini PC I could find at the time being with all my requirements. Although the cpu never goes over 54C, the AsiaRF…
- Pobrania
- 34
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFrittenpit
Topton i7 1165G7 i5 1135G7 Fan Shroud
Shroud for a 120mm fan. Slides right on top of the case.
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCompyNG
Topton N100 Router Skadis Mount (50x50 mm)
Suggested printing in the provided orientation with auto tree supports. Yes, that orientation. You could print it flat (you'd still needs supports), but then layer lines could cause the pegboard “legs” to break off. Use M3 SHCS or BHCS to…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSK
Topton Fanless Mini PC Rack Shelf with Keystone Panel
A printable rack shelf designed to mount a fanless mini PC in a standard rack enclosure. Features 6 keystone jack slots on the rear panel for clean and flexible cable management. Ideal for home lab and NAS server setups. PLA works fine…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSpongebob
80mm Fan Bracket for Topton Mini-PC
Brackets to mount a 80mm fan to a Topton N100 Mini-PC. No tools or hardware needed. printed in PETG with supports Category: Computer
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFaisal Waseem
ESRack Topton N150 Rack 2u
For the older version of Topton N150 Fanless computer. It was a tight fit. Dimensions D= 126.76 W =136.51 H= 44.37
- Pobrania
- 23
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFrittenpit
2U 19" Rack Mount for Topton Mini-PC, DAP 2U MP-1 bracket
Unscrew the 4 front screws of the mini-pc (but leave the cover in place), slide in the mini pc und screw the printed model in. Optional slot for a 120mm cooling fan on top.
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMakerMeik
Wall mount for "Topton Firewall Soft Router N100"
The bracket is suitable for the mini PC sold as “Topton pfSense Firewall Soft Router N6000 N5105 N100 4x i226-V 2.5G LAN NVMe Barebone Fanless Mini PC HDMI2.0 DP AES-NI OPNsense” on Aliexpress (as of Nov 2024). It replaces the base plate…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
PrintablesВероника Черепанова
Fan mount for Topton GM1
Fan mount for Topton GM1. It lets you securely mount a fan without case modification.
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMrMaKr
CWWK - TopTon - Kingnovy - ChangWang - Morefine - NUC Extension with FEET - small version
Small version Extends the Case of the China-NUCs so that you can fit a regular 25mm thick 80mm fan additionally to M.2 drives with heatspreaders. Also it is possible to add more I/O to the front and backpanel to make use of the internal…
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
Printablesrivado
Topton N100 80mm Fan Adapter
Created this cover which holds a 80mm fan at the bottom. This replaces the original cover and blows air right into the case, especially on the RAM and NVMe Disk. I'm using it with this stand: https://www.thingiverse.com/thing:6261436 I…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDennis List
Topton N5105 Wall mount
A wall mount for the Topton N5105 mini PC. Screws into existing holes in the rear of the device
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMiich94
Topton N100 10" rack
2U 10" Rack Mount Server Panel — Front I/O + Cooling Solution Custom-designed 2U rack mount panel for 10-inch server racks, bringing all essential I/O to the front for easy access. Built around a mini PC/SBC setup with front-facing power…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDani Goland
Topton Firewall Ventilated Bottom Cover
This is my first model I ever created, used Fusion 360. A Ventilated and heightened bottom cover for a Topton Firewall to help with the heat generated from the NVMe and the RAM. Couldn't find a model that fit this specific mini pc so I…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAndys 3D World
Topton N100 ITX 120mm fan shroud
A 120mm fan shroud to replace the piddly wee fan on the Topton N100 ITX board. I mean the tiny fan does an excellent job as it is, but you can only have a 3d printer for so long before you have to print upgrades. You will need 4x M2.5…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
Printables
1U 10'' Rack Mount Topton N5105 i226-V N150 N100 Mini PC
1U Rack Mount for Topton N5105 i226-V N150 N100 Mini PC
P
Printables
Topton N100 10" rack
2U 10" Rack Mount Server Panel — Front I/O + Cooling Solution Custom-designed 2U rack mount panel for 10-inch server racks, bringing all essential I/O to the front for easy access. Built around a mini PC/SBC setup with front-facing power…
P
Printables
Topton / Minipc modular extender
Extend a minipc to house an additional fan / harddisks. I used threaded rods to tie it all together.
P
Printables
Topton N100 Stand with top and bottom fans 124x138
This is a three-part print that lets you mount an 80mm fan below, and a 120mm fan above, your new Topton N100 "fanless" pc that you just bought only to discover that it overheats and/or burns your fingers. If you haven't bought one of…
P
Printables
10 inch Rack Mount for Topton Mini PC with Keystone
10 inch version of @Arek 's rack mount for a mini PC with keystone slot and a cutout for the power cable. Printed in PLA+ for my rack, however other filaments that are more temperature resistant are highly recommended. Different from…
P
Printables
Mini nas cwwk/topton plate for rack 10" V2
V2 avalible!!!! Changes of version 2: reinforced the base added 2 RJ45 keystone for more easy connect made the hole of DC connector more biggest center the NAS CWWK for more stability the base has been fixed so that the legs support well…
P
Printables
Fanless TopTon 92mm Fan Mount (TopTon TopHat)
Mount for a 92mm fan for the Topton "fanless" mini-PC. Because the original design of the unit being "fanless" caused it to spike internal temps to 80℃ even with almost zero load. It's designed for the below unit but it might fit others.…
P
Printables
Fan mount for Topton N6005 case
I purchased a Topton N6005 fanless mini PC, but it runs quite hot, when I have it hidden away in a cabinet. So I designed a very simple fan mount for a 120mm fan in Tinkercad - it is held in place with friction. Print two pieces, mount…
P
Printables
Mini PC/Router (Topton/Wooyi) fanless case extension
I added an M.2 sata board into my WooYi (almost identical to Topton) N5100 mini-pc/router and needed extra room to fit the sata cables. This model extends the base plate from r0bb10's model to add deeper screw wells and sides with an exit…
P
Printables
Mini PC/Router (Topton/Wooyi) fan holder
I bought a WooYi (similar to Topton) N5100 mini-pc/router and while the temps were basically fine I thought it would be fun to add a fan to keep things a little cooler. I wired a 12v 80mm fan to 5v via USB and designed this little fan…
P
Printables
Fan mount for Topton N6005 fanless case
A 120mm fan mount for the “fanless” Topton N6005 router PC. It lets you securely mount a fan without case modification. Similar to https://www.printables.com/es/model/303732-fan-mount-for-topton-n6005-case but I designed it with holes to…
P
Printables
NAS R1/R7 stand (Topton, AOOSTAR, XCY)
Hi all! I recently bought NAS R1, due to it's placement on the floor beetween desk and wardrobe I decided to create simple stand. There are two versions, one with a sharp edge and the other with a round one. On the pictures you can see…
P
Printables
Slim Wall Mount for Topton Mini-PC
I needed a compact mount to fit a Topton N100 Mini-PC with fan in a shallow structured wiring box. Total height of the Topton plus mount and fan is just under 3" which provided sufficient clearance and airflow. As in the original, the two…
P
Printables
Topton N100 PC Replacement Bottom Plate
Bought this Topton Mini PC from Aliexpress: https://www.aliexpress.com/item/1005004360072281.html Temperatures were higher than expected. CPU needed a shim. If using an NVME drive, it will generate more heat than the CPU. Remade the…