Qotom/Topton Quad NIC Firewall 10" 1.5U Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack to hold a fanless Qotom J1900 quad NIC PC, likely compatible with others. Designed to fit a 1.5U space.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 578
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
Rack I made to hold an old Qotom quad NIC PC I've been using as a PFsense box for years. Designed around the space as the top of “Modular 10 Inch Server Rack - Reworked”, which is technically 1.5U but eats into some of the vertical space a bit.
These PCs get a bit toasty in my experience since they're fanless, so I wouldn't recommend PLA. I used PETG with the following parameters and the rack is plenty solid:
- print height: 0.2mm
- perimeters: 2
- infill: 20%
- top and bottom layers: 4
- print face down with no supports
PC I used for reference. Other newer models may have the same footprint but I cannot make any promises.
https://www.qotom.net/product/MiniPC_Q10100G4U_S02_Series.htmlhttps://www.qotom.net/product/MiniPC_Q10100G4U_S02_Series.html