Qotom/Topton Quad NIC Firewall 10" 1.5U Rack Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rack to hold a fanless Qotom J1900 quad NIC PC, likely compatible with others. Designed to fit a 1.5U space.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 67
- Makes
- 0
- Views
- 570
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
Rack I made to hold an old Qotom quad NIC PC I've been using as a PFsense box for years. Designed around the space as the top of “Modular 10 Inch Server Rack - Reworked”, which is technically 1.5U but eats into some of the vertical space a bit.
These PCs get a bit toasty in my experience since they're fanless, so I wouldn't recommend PLA. I used PETG with the following parameters and the rack is plenty solid:
- print height: 0.2mm
- perimeters: 2
- infill: 20%
- top and bottom layers: 4
- print face down with no supports
PC I used for reference. Other newer models may have the same footprint but I cannot make any promises.
https://www.qotom.net/product/MiniPC_Q10100G4U_S02_Series.htmlhttps://www.qotom.net/product/MiniPC_Q10100G4U_S02_Series.html