1 / 2
Fan mount for Topton N100/N150 fanless case — zdjęcie 1
1 / 2

Fan mount for Topton N100/N150 fanless case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 120mm fan mount for Topton N150 "fanless" firewall/router/minipc

Ocena
5 / 5
Polubienia
8
Pobrania
88
Wydruki
1
Wyświetlenia
652
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed to mount a fan on my “fanless” mini pc to keep it cool.

As reported by the seller on Aliexpress, if you want to do more than just a router, you need to add a fan to dissipate the heat.


The fan mount I've found was good but not perfect:

  • it was to big to slide “freely” along the case slots
  • the screws were touching the case.

I recreated the model from scratch and adjust the dimensions. Now it's perfect for my case!

 

Be aware that the fan needs to stay a bit far away from the case, otherwise the airflow can go back into the fan, disturbing it and (potentially) damage it in the long run. This is another good reason to print this fan mount!

 

Printing notes

  • no supports and no brims needed
  • print it twice, to keep the fan levelled with the case

Tagi