CWWK - TopTon - Kingnovy - ChangWang - Morefine - NUC Extension - big version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extend the Case to fit a regular 25mm thick fan
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 2066
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Extends the Case of the China-NUCs so that you can fit a regular 25mm thick 80mm fan additionally to M.2 drives with heatspreaders.
Also it is possible to add more I/O to the front and backpanel to make use of the internal headers for USB and COM ports.
You will need extra items:
- 4x M3 threaded inserts
- 4x M3 6-8mm screws
Sometime in the future i will make a bracket for mounting one or two 2.5inch SSDs on the side of the case.
I recommend to print it out of PETG if your case gets hot.
The front and back panel will need a little bit of support.
This is still a work in progress and happens to get minor modifications over time.
If you need a smaller version with feet, go here: Link