1 / 2
CWWK - TopTon - Kingnovy - ChangWang - Morefine - NUC Extension with FEET - small version — zdjęcie 1
1 / 2

CWWK - TopTon - Kingnovy - ChangWang - Morefine - NUC Extension with FEET - small version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extend the Case to fit a regular 25mm thick fan with feet for better airflow

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
248
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Small version

Extends the Case of the China-NUCs so that you can fit a regular 25mm thick 80mm fan additionally to M.2 drives with heatspreaders.
Also it is possible to add more I/O to the front and backpanel to make use of the internal headers for USB and COM ports.

You will need extra items:

  • 4x M3 threaded inserts
  • 4x M3 6-8mm screws

Sometime in the future i will make a bracket for mounting one or two 2.5inch SSDs on the side of the case.

I recommend to print it out of PETG if your case gets hot.
The front and back panel will need a little bit of support.
This is still a work in progress and happens to get minor modifications over time.

If you need a bigger version without feet, go here: Link

Tagi