Radius finder guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
tool to measure radius corners on objects.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 72
- Wydruki
- 3
- Wyświetlenia
- 201
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed a smaller one of these years ago from thingiverse, which has been invaluable, but found occasions where I needed to measure larger radiuses.
This tool will measure exterior corners from 13-20mm, and interior corners of 3-8/10/19mm.
To use, simply place the tool against the corner you want to measure. If you can see a gap near the centre then move to a higher number. If there are gaps to the side then reduce the number. Repeat until the tool hugs the corner being measured.
No specific print options necessary.
I have uploaded 2 versions:
*_dualcolour - a dual colour print as per the photo.
*_singlecolour - for single nozzle printers. Either print all the same colour and paint the tops of the embossed numbering, or do a filament colour change.