Radius finder guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
tool to measure radius corners on objects.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 72
- Makes
- 3
- Views
- 201
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed a smaller one of these years ago from thingiverse, which has been invaluable, but found occasions where I needed to measure larger radiuses.
This tool will measure exterior corners from 13-20mm, and interior corners of 3-8/10/19mm.
To use, simply place the tool against the corner you want to measure. If you can see a gap near the centre then move to a higher number. If there are gaps to the side then reduce the number. Repeat until the tool hugs the corner being measured.
No specific print options necessary.
I have uploaded 2 versions:
*_dualcolour - a dual colour print as per the photo.
*_singlecolour - for single nozzle printers. Either print all the same colour and paint the tops of the embossed numbering, or do a filament colour change.