1 / 3
Prusa nextruder swevel mod for a smooth idler-lever ... screw cutting helper — zdjęcie 1
1 / 3

Prusa nextruder swevel mod for a smooth idler-lever ... screw cutting helper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mod is just about using a different screw. This screw can be lengthed more easier with this 3d printed part.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
181
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Hi, on my Prusa XL 5T all 5 printheads suffered from a not smooth working swivel-retraction.
This all happend before exchanging the nextruder parts to PCCF so it could be a result of allready “missformed” PETG parts by using a self build housing - prusas hopusing was not available (one year ago).

IMHO: Attention I am no engeneer but IMHO
It is a construction failure, that the screws running through the springs, allready have a thread where no thread should be to run smooth through the metal hole and not blocking the spring from stratching or squissing!

I DON'T know how importend it is for printing to have a smooth “pushed” and flexibel pressed idler-level, but it seems to work great and the springs can do their work no.

So go and graab some 3x40mm zylindric Headscrews
I ordered them on schraubenking.at (or schraubenking.de :-))

print the gauge and cut the screws.

Exchange the screws from the lever on your nextruder …

Done

Tagi