Prusa nextruder swevel mod for a smooth idler-lever ... screw cutting helper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mod is just about using a different screw. This screw can be lengthed more easier with this 3d printed part.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Hi, on my Prusa XL 5T all 5 printheads suffered from a not smooth working swivel-retraction.
This all happend before exchanging the nextruder parts to PCCF so it could be a result of allready “missformed” PETG parts by using a self build housing - prusas hopusing was not available (one year ago).
IMHO: Attention I am no engeneer but IMHO
It is a construction failure, that the screws running through the springs, allready have a thread where no thread should be to run smooth through the metal hole and not blocking the spring from stratching or squissing!
I DON'T know how importend it is for printing to have a smooth “pushed” and flexibel pressed idler-level, but it seems to work great and the springs can do their work no.
So go and graab some 3x40mm zylindric Headscrews
I ordered them on schraubenking.at (or schraubenking.de :-))
print the gauge and cut the screws.
Exchange the screws from the lever on your nextruder …
Done