Mono Air Condition 3 tube complete mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Mono AC complete mod: Intake from outside, angle adapter for exhaust, upward inside intake
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 688
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here it is the full mod.
You need a big printer like 300x300x300 to go for it in one piece. Also just PETG or better, because its hot.
Outdoor Inake and Indoor Intake should work out of the box, if you have a similar machine.
If you go for the indoor Intake you should go for AirConditionExhaust90DegreeLeftShitfted, else there is no room for the exhaust pipe.
Have fun with it and make some comments.
Over all you need the bayonnet system rings from Christfu to connector your tubes. And yeah, an open windows maybe with adapters to bring the air outside. For the indoor intake i just use a pipe that is going straight to my ceiling to grab hot air.