Tito biped robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Who is Tito? Walker and dancer DIY biped robot, derivative design from Zowi which is based on BOB the original biped…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 681
- Wydruki
- 1
- Wyświetlenia
- 4845
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Who is Tito?
Walker and dancer DIY biped robot, derivative design from Zowi which is based on BOB the original biped robot that uses only 4 servos to walk and move. Made the following improvements:
- Able to have an Arduino UNO board (or smaller) inside the robot head.
- Bigger motors use 4x Futaba S3003 servos or similar
- 3 LEDs for a simple mouth.
- Rounded top head.
- Legs thickness increased and reinforced rounds.
- Rounded feet top.
- Chassis - base simplified.
- Easy to reprogram or energize having the connectors in the back.
- Tito uses the same connections and code as any Otto find the Instruction Manual and coding Otto DIY
Modify using tinkercad here https://www.tinkercad.com/things/4aUQhPtPRct-tito-biped-robot
<iframe width="725" height="453" src="https://www.tinkercad.com/embed/4aUQhPtPRct?editbtn=1" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>
We invested lots of time and resources to provide open source code, software and hardware, please support this project by just giving us a ❤ Like and share and you are welcome to be a part of this friendly community of robot builders, teachers and makers.
Join today our Otto Builder community