1 / 3
Core One Nozzle Wiper (Lefthand or Righthand) w/ name badge — zdjęcie 1
1 / 3

Core One Nozzle Wiper (Lefthand or Righthand) w/ name badge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix: Nozzle wiper: Slimmed it down, better aligned the hole, added flanges, added OpenSCAD for name. Made right vers.

Ocena
4,8 / 5
Polubienia
54
Pobrania
173
Wydruki
5
Wyświetlenia
2072
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

https://drive.google.com/file/d/1fKrMa6-fVlEjJedkJXXCDy-n6K1irm-o/view?usp=sharing

Lefthand or Righthand nozzle wiper which uses the Bambulab A1 silicone wiper with optional name badge.

I remixed this from https://www.printables.com/model/1287162-core-one-nozzle-wiper-remix-no-supports, by slimming it down some, adding flanges for rigidity, and better aligned the hole. I also created a righthand model (which was really challenging, BTW). The righthand version sits a little further from the bed and I customized the g-code a bit to create an x-pattern.

  1. Open OpenSCAD and add your text. Change the text size to ensure that it lays on the flat side and doesn't spill over.
  2. Orient it on the surface indicated in the picture, you can print it with no support but you may need a brim.
  3. Print it in at least PETG
  4. Insert brass insert from the top so that when you tighten the m3x10 screw from underneath it will hold tightly.
  5. Adjust the starting G-code (copied and adjusted from) https://www.printables.com/model/1262695-core-one-nozzle-wiper-remix

IF LEFT:

from:

G29 P9 X208 Y-2.5 W32 H4

to:

;G29 P9 X208 Y-2.5 W32 H4 ; original nozzle cleaning method
G0 X40  Y-14 Z1.5 F10000;
G0 X76 Y-18 Z1.5 F10000;
G0 X40  Y-14 Z1.5 F10000;
G0 X76 Y-18 Z1.5 F10000;
G0 X40  Y-14 Z1.5 F10000;

IF RIGHT:

from:

G29 P9 X208 Y-2.5 W32 H4

to:

;G29 P9 X208 Y-2.5 W32 H4 ; original nozzle cleaning method -- NEW
G0 X210  Y-14 Z1.5 F10000; -- NEW
G0 X174 Y-18 Z1.5 F10000; -- NEW
G0 X174 Y-14 Z1.5 F10000; -- NEW
G0 X210  Y-18 Z1.5 F10000; -- NEW
G0 X174 Y-14 Z1.5 F10000; -- NEW
G0 X174 Y-18 Z1.5 F10000; -- NEW
G0 X210  Y-14 Z1.5 F10000; -- NEW

Additionally, if you wish to move the purge line to the left replace the “extrude purge line” section with this:

;
; Extrude purge line
;
G92 E0 ; reset extruder position
G1 E{(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; deretraction after the initial one
G0 E5 X15 Z0.2 F500 ; purge -- NEW
G0 X25 E4 F500 ; purge -- NEW
G0 X35 E4 F650 ; purge -- NEW
G0 X45 E4 F800 ; purge -- NEW
G0 X48 Z0.05 F8000 ; wipe, move close to the bed -- NEW
G0 X51 Z0.2 F8000 ; wipe, move quickly away from the bed -- NEW

and “G29 P1 X150 Y0 W100 H20 C ; probe near purge place” with this:

;G29 P1 X150 Y0 W100 H20 C ; probe near purge place -- OLD
G29 P1 X50 Y0 W100 H20 C ; probe near purge place -- NEW

 

----------------------------------------------------

 

I printed this in Prusament PC-Blend, 15% Gyroid, .20 LH, 0.4 nozzle, on a smooth PEI build plate with Magigoo PC. I needed a small brim as well.

Note: There is a slight difference in design for the lefthand and righthand nozzles. If requested, I can post their other versions.

 

Tagi