Core One Nozzle Wiper (Lefthand or Righthand) w/ name badge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix: Nozzle wiper: Slimmed it down, better aligned the hole, added flanges, added OpenSCAD for name. Made right vers.
- Rating
- 4.8 / 5
- Likes
- 54
- Downloads
- 173
- Makes
- 5
- Views
- 2,072
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
https://drive.google.com/file/d/1fKrMa6-fVlEjJedkJXXCDy-n6K1irm-o/view?usp=sharing
Lefthand or Righthand nozzle wiper which uses the Bambulab A1 silicone wiper with optional name badge.
I remixed this from https://www.printables.com/model/1287162-core-one-nozzle-wiper-remix-no-supports, by slimming it down some, adding flanges for rigidity, and better aligned the hole. I also created a righthand model (which was really challenging, BTW). The righthand version sits a little further from the bed and I customized the g-code a bit to create an x-pattern.
- Open OpenSCAD and add your text. Change the text size to ensure that it lays on the flat side and doesn't spill over.
- Orient it on the surface indicated in the picture, you can print it with no support but you may need a brim.
- Print it in at least PETG
- Insert brass insert from the top so that when you tighten the m3x10 screw from underneath it will hold tightly.
- Adjust the starting G-code (copied and adjusted from) https://www.printables.com/model/1262695-core-one-nozzle-wiper-remix
IF LEFT:
from:
G29 P9 X208 Y-2.5 W32 H4to:
;G29 P9 X208 Y-2.5 W32 H4 ; original nozzle cleaning method
G0 X40 Y-14 Z1.5 F10000;
G0 X76 Y-18 Z1.5 F10000;
G0 X40 Y-14 Z1.5 F10000;
G0 X76 Y-18 Z1.5 F10000;
G0 X40 Y-14 Z1.5 F10000;IF RIGHT:
from:
G29 P9 X208 Y-2.5 W32 H4to:
;G29 P9 X208 Y-2.5 W32 H4 ; original nozzle cleaning method -- NEW
G0 X210 Y-14 Z1.5 F10000; -- NEW
G0 X174 Y-18 Z1.5 F10000; -- NEW
G0 X174 Y-14 Z1.5 F10000; -- NEW
G0 X210 Y-18 Z1.5 F10000; -- NEW
G0 X174 Y-14 Z1.5 F10000; -- NEW
G0 X174 Y-18 Z1.5 F10000; -- NEW
G0 X210 Y-14 Z1.5 F10000; -- NEWAdditionally, if you wish to move the purge line to the left replace the “extrude purge line” section with this:
;
; Extrude purge line
;
G92 E0 ; reset extruder position
G1 E{(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; deretraction after the initial one
G0 E5 X15 Z0.2 F500 ; purge -- NEW
G0 X25 E4 F500 ; purge -- NEW
G0 X35 E4 F650 ; purge -- NEW
G0 X45 E4 F800 ; purge -- NEW
G0 X48 Z0.05 F8000 ; wipe, move close to the bed -- NEW
G0 X51 Z0.2 F8000 ; wipe, move quickly away from the bed -- NEWand “G29 P1 X150 Y0 W100 H20 C ; probe near purge place” with this:
;G29 P1 X150 Y0 W100 H20 C ; probe near purge place -- OLD
G29 P1 X50 Y0 W100 H20 C ; probe near purge place -- NEW
----------------------------------------------------
I printed this in Prusament PC-Blend, 15% Gyroid, .20 LH, 0.4 nozzle, on a smooth PEI build plate with Magigoo PC. I needed a small brim as well.
Note: There is a slight difference in design for the lefthand and righthand nozzles. If requested, I can post their other versions.
