Prusa i3 MK3S Corner ENCLOSURE - Ikea LACK table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just my design of a IPrusa i3 MK3S Corner ENCLOSURE - Ikea LACK table from the 4mm plexiglass. It is not a tightly…
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 1508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Just my design of a IPrusa i3 MK3S Corner ENCLOSURE - Ikea LACK table from the 4mm plexiglass.
It is not a tightly closed cabinet. There is a small gap about 2.5mm between plexi and LACK table.
Video instructions can be found on youtube: https://youtu.be/S5HYBOylQ7I
What you'll need:
Print :
1x Prusa_Enclosure_Top_Corners
1x Prusa_Enclosure_Bottom_Corners
1x Prusa_Enclosure_Top_Internal_Reductions.stl
2x Prusa_Enclosure_Door_strip
1x Prusa_Enclosure_magnet_holder_and_handle
1x Prusa_Enclosure_Filament_guide
2x Ikea_TopSpoolHolder
Plexiglass dimensions:
2pcs: 438 x 488 mm, thickness 4mm
White Lacquered MDF Board (or Standard Hardboard) dimensions:
2pcs: 443 x 447 mm, thickness 3mm
Neodyme Magnets:
4pcs: N52 (or N38) disk 8x3mm
4pcs: N52 (or N38) disk 8x2mm
Screws and Nuts:
6pcs : Original Ikea Lack screw
3pcs: 8mm / M8 x 30 Wood to Metal Screw
3pcs: 8mm / M8 x 20 Wood to Metal Screw
3pcs: M8 x 30 Long Rod Nut
12pcs: M3 x 6
1pcs: 6.1mm X 14.5mm System Screw (#7 x 14.5mm Deep Thread System Euro Screws)
1pcs: 5mm x 10mm System Screw
Other:
10mm aluminium rod
Tools :
2.7mm, 4mm, 6mm, 8mm, 9mm, 10mm drill
15mm forstner drill bit
Philips screwdriver
Torx screwdriver
Wrench 13mm
3D printed drill jig for embedding magnets (file Prusa_Enclosure_magnet_holder_drill_jig)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament: Filament PM PLA White
Category: 3D Printer Accessories