LayersFactory
Zgłoś model
1 / 11
Ultimate Cereal Container Filament Drybox - Respin_061425 — zdjęcie 1
1 / 11

Ultimate Cereal Container Filament Drybox - Respin_061425

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

zktec

@zktec_3322325

Respin of GunplaMark’s drybox with 1-piece top and analog hygrometer plus some geometry refinements

Ocena
0 / 5
Polubienia
24
Pobrania
128
Wydruki
0
Wyświetlenia
1106
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (2)Kolekcje (42)Powiązane

This is a respin of GunplaMark’s very nice drybox design. I wanted to be able to stack the boxes with better stability though, so I patched the top corner brackets into a single piece, and adjusted geometry to provide a perfect fit when stacking.  It also changes the hygrometer to a large analog one that you can find on AliExpress. I like these analog hygrometers because it has a slotted screw on the back side that allows me to do a single-point calibration at near 0% humidity. To calibrate I just place the hygrometer in a large bag of fresh dessicant for a day, then turn the screw to calibrate to 0%. Of course the sensor’s gain and linearity is probably not that good, but not near as bad as the garbage information those digital sensor provide at low humidity levels.  

Hardware needed:                                                                     

Tagi

dryboxstoragesystemfilamentdrybox