1 / 8
Duel servo Headlight mod for Kyosho Fazer D2 AE86 — zdjęcie 1
1 / 8

Duel servo Headlight mod for Kyosho Fazer D2 AE86

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mount and servo arms allows you to set up each headlight on its own individual servo.

Ocena
0 / 5
Polubienia
29
Wydruki
0
Wyświetlenia
1298
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Standard Digital File License

This mount and servo arms allows you to set up each headlight on its own individual servo for your Kyosho Fazer FZD2 Toyota Sprinter Trueno AE86 Drift RC.

Does not work with the stock controller without a servo reverser and a Y harness to hook up both servos to the 3rd channel

This allows you to not only get away from the flex and sag of the original parts that cause the headlights to not shut fully after a few uses. It also allows you to set up functions like winking individual lights if you have a computerized transmitter that has programming functions.   

 

There is ZERO modifications needed to the stock headlights or body and this uses the stock screws that hold the lights in to mount it

 

For the servos I used these

https://www.amainhobbies.com/ecopower-827-12g-digital-metal-gear-micro-servo-high-voltage-ecp-827/p1310408

You will have to cut or file off the mounting tabs. They hit the body and don't allow for them to line up properly. 

Installation video coming soon.

also I'd love to see all the cars that end up with my parts, please post them in the comments.

 

Print settings I used (mostly stock MK4S 0.15 Structural)

PLA

Layer .15

Perimeters 2

infill Gyroid 15%

Supports Organic at a 40 deg overhang 

Tagi