Fuji GSW 690 Gegenlichtblende, lens hood, lens shade, Streulichtblende, Störlichtblende
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fuji GSW 690 Gegenlichtblende, lens hood, lens shade, Streulichtblende, Störlichtblende
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Gegenlichtblende / Streulichtblende / Sonnenblende / Störlichtblende für die Fuji GSW 690 mit M 67 x 0,75 Filtergewinde.
Die zylindrische Blende muss, mit dem Gewinde nach unten, mit Stützmaterial gedruckt werden. Die konischen mit dem Gewinde nach oben ohne Stützmaterial.
Das Feingewinde sollte mit der niedrigst möglichen Layerhöhe gedruckt werden.
Bei der zylindrischen konnte (noch) keine Vignettierung festgestellt werden.
Testdrucke wurden mit Jayo PETG ausgeführt.
…………………
Lens hood / lens shade / sun visor for the Fuji GSW 690 with an M 67 x 0.75 filter thread.
The cylindrical hood must be printed with the thread facing down and with support material. The conical hoods must be printed with the thread facing up and without support material.
The fine thread should be printed with the lowest possible layer height.
No vignetting has been detected (yet) with the cylindrical hood.
Test prints were made using Jayo PETG.