Vacuum Disk for Filament Storage Bags Optimized for Easy 10-minute Print!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes it much easier to use cheap filament storage vacuum bags. No supports needed.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
General:
As a composite manufacturing engineer, I have a lot of experience with vacuum ports. These are based on the design of the AirTech ports we use for expensive composite structures to pull vacuum.
Why I designed this:
The first vacuum bags I ordered were the Sunlu ones with a hard backer under the vacuum port. These were temporarily unavailable when I needed new bags, and I was extremely disappointed in the flimsy vacuum port.
Printing recommendations:
Layer height: .2 or finer
Material: PLA or PETG
Supports: None
Infill: 15%
Walls: 2-3
Other Modifiers: Print with the ribbed surface down
Material Quantity: ≈10grams
I printed from PLA on Prusa XL at .15 layer height with 15% rectilinear infill.
Cautions, closing notes, and updates:
Orientation doesn't matter in use
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like and a rating, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
For more, or to order a print, check out: Home | FabTech