Floor Vent/Register 4x9
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Floor vent register using infill as the diffuser
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently moved into a house that needed new floor registers. I did not want to buy new ones and wanted to have a unique design.
Made in fusion 360.
The file has 2 bodies, and the center is used as the part to make the vent.
(Standard settings for 0.4 nozzle)
No top or bottom shells for the diffuser
1-2 walls
250% sparse infill line width (Makes it much stronger as a vent)
I would suggest Cubic, Gyroid, Crosshatch, Triangles, and honeycomb as infill patterns.
There is also a 2 part model for printing on smaller printers, normal model needs atleast 300mm wide bed.