1 / 5
Airsense 10 Cpap machine Shelf that fits on the machine — zdjęcie 1
1 / 5

Airsense 10 Cpap machine Shelf that fits on the machine

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A shelf designed to fit snugly on the CPAP machine itself.

Ocena
0 / 5
Polubienia
17
Pobrania
80
Wydruki
0
Wyświetlenia
591
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Cpap machines take up a lot of space. Some people put their machines on small tables that they can put things under. That does not work for me as well, since anything under the machine would be awkward to reach. Plus, I am a very active sleeper and I fear knocking my machine off the table. 

So I made a shelf to go above the machine, using as little space as possible around the machine, focusing on verticality. There is a nice big space for blind button finding in the night under the shelf. The compartments on the shelf are sized for a personal use to me, but they can easily be removed. I am sharing the raw OBJ too for any editing you might want. 

 

Caviats! 

This is my first 3D print, so there might be issues. 

The shelf can slide a little, I wanted to upload a version with little hooks to stop it sliding off, but I could not find a pretty way to do this. You can increase grip with some cut up grip mats or those little rubber things that stop cupboards banging. 

The joints that connect the legs to the body work pretty well, but they are not 100% reliable if you are moving it around a lot. If you struggle, PLA weld or super glue will do the trick. 

The contours of the legs sit the cpap machine's shape very well. If you want to improve it further, a hairdryer and gentle pressure will sort that out for you. 

Tagi